This BrosTrend WiFi Extender collects signal from the home WiFi router and amplifies to such an extent that it corrects the dead networking zones. But if the extender is connected but still you are receiving messages of no internet connection, then it’s a matter to be taken into consideration. There could be the possible multiple reasons behind the BrosTrend WiFi extender no Internet.
Reasons Brostrend WiFi Extender no Internet
Discussing the causes of the issue is the first step in the troubleshooting procedure. To learn why the BrosTrend WiFi extender isn’t connecting to the internet, have a look at the points listed below:
- Your whole BrosTrend WiFi extender setup and the primary router are far apart which is ideally inappropriate for smooth connectivity.
- There are networking issues with your extension due to signal disturbance by thick walls or some electromagnetic radiation producing gadgets.
- The range extender is receiving incorrect or unreliable power, either there is some fault with source outlet or the connected cables are disfigured.
- You are using an out dated firmware version for your extension, which might be producing the technical glitches.
Keeping the aforementioned things in mind, let’s get straight to the troubleshooting advice you should adhere to in order to repair the issue in a few minutes.
Troubleshooting Tips
Placement of Extender
Check the BrosTrend range extender’s gap, if over 10ft, and adjust if necessary, but avoid zero distance to prevent WiFi device signal clashes.
Reboot the Brostrend Extender
Power cycling the device will help to rectify the technical glitches in the system, if there are any. You need to plug out the BrosTrend WiFi extender from the electrical outlet and wait for couple of minutes. Then plug in the BrosTrend WiFi extender after a while. This method is quite effective in rectifying the minor issues like BrosTrend WiFi extender no internet.
But if after rebooting the device, you are still struggling to resolve the trouble then you can use a LAN cable and connect one end with the LAN port of your router and other end with the WAN port of the BrosTrend extender. But be mindful that the cable is free from any wear and tear.
Firmware Update
To fix a no internet issue with your BrosTrend WiFi range extender, check if the firmware needs updating and install the latest version without disconnecting the extender from the router. Ensure the range extender is placed in an interference-free area to avoid distortion or obstructed signals.
Smooth Internet Connection
Check wall socket for damage and connect extender to another within router’s WiFi signal range. Connect extender to UPS for power outages and surges.
Perform a factory reset in case you are unable to resolve the issue by trying above mentioned hacks.
Conclusion
The BrosTrendWiFi Extender may experience no internet problem after following the provided techniques. You can speak with the support team if require further assistance.